焊接方式独特,采用全新的低温焊接形式,对产品镀锌层不产生破坏,焊点牢固,焊缝美观,密封性好,焊后不需要对焊缝进行任何处理。
The welding method is unique and adopts a new low-temperature welding form, which does not damage the galvanized layer of the product. The welding points are firm, the weld seam is beautiful, and the sealing is good. After welding, there is no need to perform any treatment on the weld seam.
机械成型风管的制作使优的镀锌板不受伤害,镀锌层不被破坏,延长了使用寿命。
The production of mechanically formed air ducts ensures that the excellent galvanized sheet is not damaged, the galvanized layer is not damaged, and the service life is extended.
规格统一,尺寸标准,保证了管道内壁平整,光滑,因而便于洁净,使物料输送流畅。
Unified specifications and standardized sizes ensure that the inner wall of the pipeline is flat and smooth, making it easy to clean and smooth for material transportation.
自成型法兰能使管道材质统一,a不再使用角钢法兰,减轻管道重量达20%以上,因此建筑物的承荷能力可大大减小,从而减少了建筑物的总体造价。
Self formed flanges can unify the material of pipelines, eliminate the use of angle steel flanges, and reduce the weight of pipelines by over 20%. Therefore, the load-bearing capacity of buildings can be greatly reduced, thereby reducing the overall cost of the building.
增强管道美观,外观漂亮,结构精巧,线条流畅,性能优越,安装外露的风管,特别适用本产品。
Enhanced pipeline aesthetics, beautiful appearance, exquisite structure, smooth lines, superior performance, installation of exposed air ducts, especially suitable for this product.
典型的圆形风管件长一般3—6米,矩形管件长1—1.5米,减少了管件的连接点,使管件结合部的泄漏减小到低的程度。
A typical circular air pipe fitting is generally 3-6 meters long, while a rectangular pipe fitting is 1-1.5 meters long, reducing the connection points of the pipe fitting and minimizing the leakage at the joint of the pipe fitting.
机械化流水线制作的管件及接头和零配件都有标准的密封圈,由于是标准化,工厂化生产,因而气密性更好。
The pipe fittings, joints, and spare parts produced by the mechanized assembly line all have standard sealing rings. Due to the standardization and factory production, the air tightness is better.
机械成型的压筋和加强筋,提高管壁的强度,可节约材料厚度,降低成本。西安螺旋风管厂家表示螺旋管的咬口潜缝厚度是管体的4倍,使管道的刚性非常大,具有好的承受压力性能,特别是负压尤其特出。
Mechanically formed compression and strengthening ribs can improve the strength of the pipe wall, save material thickness, and reduce costs. The manufacturer of spiral air ducts in Xi'an stated that the seam thickness of the spiral pipe is four times that of the pipe body, which makes the pipeline very rigid and has good pressure resistance, especially under negative pressure.
.科学的接缝,咬口方法,能保证管道气体流畅,而不影响管道流通口径。
Scientific jointing and biting methods can ensure smooth gas flow in the pipeline without affecting the diameter of the pipeline flow.
上一篇:镀锌螺旋风管加工安装排烟出现问题
下一篇:通风管道加工过程中怎么避免纵向接缝?