当前位置: 首页 - 新闻资讯 > 公司动态

厨房排烟工程安装的静音工作如何做到合理?

来源:http://www.jntfgd.com 日期:2020-08-21 发布人:admin

厨房排烟工程的安装是一个很细致的工作,有的时候处理不好,就可能有噪音发出,所以在进行厨房排烟工程安装的时候一定要做好静音处理,那厨房排烟工程的静音工作应该怎么做好呢,
The installation of kitchen smoke exhaust engineering is a very detailed work. Sometimes, if it is not handled properly, there may be noise. Therefore, when installing the kitchen smoke exhaust project, we must do a good job of mute treatment. How should we do a good job in the silent work of kitchen smoke exhaust engineering,
通风工程对于工厂、仓库、饭店等都是需要准备的设备,通风工程主要负责通风、引风、排风、除尘等工作,济南酒店厨房排烟罩平常看到的风扇、空调其实都是通风工程的一种。那么像一般在工厂、烧烤店等安装的通风装置是利用风管,因此在通风工程的施工之前要做好准备工作,一起来了解一下吧。
Ventilation engineering is the equipment that needs to be prepared for factories, warehouses, hotels, etc. the ventilation engineering is mainly responsible for ventilation, induced air, exhaust, dust removal and other work. The fan and air conditioning commonly seen in the kitchen exhaust hood of Jinan hotel are actually one kind of ventilation engineering. Well, the ventilation devices installed in factories, barbecue shops, etc. generally use air pipes. Therefore, we should make preparations before the construction of ventilation engineering. Let's have a look at it.


济南酒店厨房排烟罩
Jinan hotel kitchen smoke hood
一、部件安装前应进行如下检查,经检查合格并填写有关验收资料后方可进行安装:
1、 The following inspection shall be carried out before the installation of components, and the installation can be carried out only after passing the inspection and filling in relevant acceptance data:
1、风口表面应平整,偏差<=2mm,矩形风口对角线之差<=3mm,圆形风口任意正交两直径的允许偏差<=2mm。
1. The surface of tuyere should be flat, the deviation is less than 2mm, the diagonal difference of rectangular tuyere is less than 3mm, and the allowable deviation of any two orthogonal diameters of circular tuyere is less than 2mm.
2、风口各转动部分应灵活,叶片或插板应平直,叶片内距应均匀,散流器的扩数环和调节应同轴,轴向间距分布匀称,叶片等启闭应完全,人防密闭阀方向与冲击波相准确,不可装反,济南酒店厨房排烟罩叶片全开或全闭,不可作调节风量之用。
2. The rotating parts of the tuyere should be flexible, the blades or inserts should be straight, the inner distance of the blades should be uniform, the expansion ring and adjustment of the diffuser should be coaxial, the axial spacing distribution should be uniform, the opening and closing of the blades should be complete, the direction of the air defense airtight valve should be accurate with the shock wave, and it should not be installed reversely. The blades of smoke exhaust hood in Jinan hotel kitchen should be fully opened or closed, which can not be used to adjust the air volume.
3、各类阀门制作应牢固,调节制动装置应准确灵活、可靠,并标明阀门启闭方向,防火阀壳体厚度应大于等于2mm,材料选用应符合GB50243-97规范要求。
3. The manufacturing of all kinds of valves shall be firm, the adjustment and braking device shall be accurate, flexible and reliable, and the opening and closing direction of the valve shall be indicated. The thickness of fire damper shell shall be greater than or equal to 2mm, and the material selection shall meet the requirements of GB 50243-97.
4、柔性短管人防滤毒系统选用橡胶型,其他选用三防防火帆布,各吊、支、托架,应平整牢固,焊缝饱满,抱箍的圆弧应均匀。
4. Rubber type is selected for flexible short pipe civil air defense virus filtration system, and fire-proof canvas is selected for others. All hangers, supports and brackets shall be flat and firm, with full weld seam and even arc of hoop. 上一篇:通风管道安装应满足哪些条件?
下一篇:厨房排烟罩的排烟阀有什么作用?

产品

  • 厨房排烟
  • 厨房排烟
  • 轴流风机
  • 不锈钢制品

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请及时与我们联系,未经沟通本站不承担相关法律责任!