通风管道在日常运作中需要注意的几个小细节。高氏通风管道工程的通风管道的主要用途如下：榜首、通风体系：送新风和排气，将不好气体排出室外，把室外新鲜空气送室内。一般而言，通风体系的流量都很大，因此要求运用阻力较小的空气运送管道，以节省造价和运转费用——通风管道就更适用。
Several small details need to be paid attention to in the daily operation of ventilation pipes. The main uses of the ventilation pipes in Gaoshi ventilation pipeline project are as follows: first, ventilation system: supply fresh air and exhaust, discharge the bad gas out of the room, and send the outdoor fresh air to the room. Generally speaking, the flow of the ventilation system is very large, so it is required to use the air delivery pipe with small resistance to save the cost and operation cost - the ventilation pipe is the most suitable.
一般情况下运用镀锌铁管，有腐蚀性及特别湿润的场所运用不锈钢管。
In general, galvanized iron pipes are used, and stainless steel pipes are used in corrosive and especially humid places.
二、空调体系：通风管道可内贴保温资料，表面美观。
2、 Air conditioning system: the ventilation pipe can be pasted with insulation data, and the surface is beautiful.
三、排油烟体系：饭店、酒楼、宾馆的厨房均有大量油烟发作，需要排出，选用通风管道是适宜的，强度好，经济实用。
3、 Oil smoke exhaust system: there are a lot of oil smoke attacks in the kitchen of hotels, restaurants and hotels, which need to be discharged. It is suitable to select ventilation pipes with good intensity, economy and practicality.
四、除尘体系：除尘设备的收集和运送，可运用通风管道。
4、 Dedusting system: collection and transportation of dedusting equipment, ventilation pipe can be used.
五、散装物料运送：气力运送体系种，一些较细些松懈的物料颗粒，可运用通风管道运送，造价低、效果好。
5、 Bulk material transportation: pneumatic transportation system, some finer and looser material particles can be transported by ventilation pipe, with low cost and good effect.
严格遵守操作要求将的降低通风管道装置的事故发作。所以在日常的运用中要注意以下的几点：
Strict compliance with the operation requirements will minimize the occurrence of accidents in the ventilation system. Therefore, we should pay attention to the following points in daily use:
1.运转操作有必要严格执行操作规程，操控工艺目标，杜绝超温、超压运转;
1. It is necessary to strictly implement the operation procedures, control the process objectives, and prevent over temperature and over pressure operation;
2.检修或局部更换通风管道时，避免错用或不合理代用而降低管道的极限应力;
2. During maintenance or local replacement of ventilation pipes, avoid misuse or unreasonable substitution to reduce the ultimate stress of pipes;
3.通风管道体系应按规则装设泄压设备并坚持其活络好用;
3. The ventilation pipe system shall be equipped with safety pressure relief equipment according to the rules and adhere to its flexible and easy use;
4.通风管道有必要由有资格的规划单位进行规划并符合规划规范的规则;
4. It is necessary for the ventilation pipeline to be planned by a qualified planning unit and conform to the rules of the planning specifications;
5.采纳有效办法避免大气及介质对通风管道的腐蚀;
5. Adopt effective measures to avoid the corrosion of air and medium to ventilation pipe;
6.通风管道装置工程投用前应进行役前查看和验收，管系结构、资料、焊接、热处理、压力试验等关键环节有必要
6. Check and acceptance shall be carried out before putting into operation of the ventilation pipeline device project. It is necessary to carry out key links such as pipe system structure, data, welding, heat treatment, pressure test, etc 上一篇：通风管道在施工中避让原则是什么？
下一篇：济南通风管道是通风系统重要组成部分