In recent years, in order to have a better quality of life, there are more and more smoke exhaust pipes installed in the kitchen. I believe everyone should be familiar with the smoke exhaust pipes. In our life, pipe smoke exhaust is very common. With the increase of service time, the pipeline is easy to be blocked or the smoke exhaust is not smooth. Do you know the reason for poor smoke exhaust? How can we solve this problem?
The pipe cleaning specifications are as follows: after cleaning the kitchen flue of the smoke exhaust hood, the smoke exhaust duct can be seen in most areas. The original inner cavity is tin, leaving no small oil stains that are difficult to clean; The surface of kitchen stove shall be free of oil stain, clean and tidy; The surface layer of centrifugal impeller can be seen in most areas; The bottom end of the motor shall be free of depression and oil stain; There is no oil stain and oil stain difficult to clean outside the pipeline.
If the smoke exhaust pipe cannot be cleaned immediately, it may be very inconvenient to clean after the oil pollution is generated. The oil pollution will endanger the use of oil fume purification equipment, block the pipeline, fill people's kitchen with kitchen oil fume, and cause our bad feeling about the use of the kitchen. Therefore, people need to clean and maintain the pipeline immediately and often to maintain a good natural environment in the kitchen.
It is recommended to clean the smoke exhaust pipe during the installation of smoke exhaust pipe, and the cleaning of smoke exhaust hood and kitchen stove is essential. Before cleaning the pipe, people need to clean the surface of the smoke exhaust hood, smoke exhaust system outlet, lampshade, smoke exhaust outlet, motor and kitchen stove in the smoke exhaust hood. In addition, it is important to clean the smoke exhaust duct at the connection between the smoke exhaust outlet and the smoke hood and the parallel surface of the smoke hood. The cleaning of this position can not only make the exhaust flue pipe give full play to its role after cleaning, but also make the whole kitchen clean and tidy by discharging the flue gas from Jinan kitchen.
The cleaning of the smoke exhaust hood of the smoke exhaust system software requires the use of oil chemicals to clean up a large amount of oil stains in the smoke exhaust duct, and then the high-pressure cleaning machine ejects oil chemicals, and then clean it with cold water. For long-term use, the fan blades on the centrifugal fan will produce thick oil stains, which will also endanger the actual effect of the exhaust system of the centrifugal fan. During cleaning, the centrifugal fan shall be removed first to clean the internal centrifugal impeller, inner cavity and surface.
After washing and before assembly, it is recommended to add grease to the centrifugal fan. The smoke exhaust in the kitchen will make the centrifugal fan more convenient. The actual effect of natural ventilation of Jinan kitchen natural ventilation and smoke exhaust system software will also damage the smoke purification equipment. After long-term use, many oil stains are often found on the inner stage and filter screen, and the actual cleaning effect is worse. When cleaning, it is recommended to soak it with a cleaner with high efficiency.
The above is the knowledge brought to you today. Jinan ventilation duct has been focusing on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.jntfgd.com