Before assembling the spiral air duct, you need to do a lot of preparatory work, and contact the actual situation to inquire the actual installation method on the spot. We can explain in detail the basic standards of Ningbo ventilation duct (Galvanized spiral pipe, stainless steel spiral pipe and thin iron spiral pipe). In fact, they can all have normal structure. You can also understand some common constructors. You can also explain the material of the pipeline and how to use it in the drawing.
For more complex industrial buildings, in the development stage, each category (HVAC, water supply and drainage, power distribution, lighting fixtures and house buildings) shall be divided into indoor space and the elevation range of each category of pipeline shall be determined. In a relative situation, you can't exceed the limit of adjusting for yourself. If a single pipe section crosses the boundary, other items shall be consulted.
Before the project construction, if all problems occur in the project construction process, the technical engineer of the person in charge of machinery and equipment shall look for the technical engineer in detail. If you can make pipelines and single lines on the same general plan, you can divide them according to region. Z good can better explain. If we can deal with the problem in time, we can deal with this problem normally, which is very key.
What are the noteworthy points of Ningbo spiral air duct in engineering construction?
The basic principle of dealing with the impact coordination of various Cixi ventilation air ducts is usually: "small pipe allows large pipe, with working pressure so that there is no working pressure". For example, if the water pipe collides with the gas pipeline, the water pipe should be rotated. If the cold water pipe and tap water pipe collide with the tap water pipe below, the cold water and hot water pipe shall be removed and replaced.
In addition, it is necessary to make an in-depth analysis of the application area. Which area is faster? If the situation of ventilation duct can be explained systematically, the application is also faster. Now it is used in many industrial enterprises, and the industries involved are indeed very common. It should be able to better explain how it is used.
Before the construction of the project, the person in charge of machinery and equipment and the technical engineer shall draw various lines on the single floor general plan. Color pens shall be used for each type of pipe. In order to better reduce investment, save indoor space and reduce the relative height of the floor, spiral duct manufacturers can pave some non inclined pipelines according to the load-bearing beams (such as water pipe, fire spitting pipe, etc.).
Simply put, no matter what the situation, when you choose the ventilation duct, you need to see what can give full play to the faster effect. It can play a good role in special steam supply pipeline. In the development stage, it should be explained more clearly that protection can be used normally and give full play to its faster effect. This is also the key link and part of the basic information we all want to know.