In recent years, in order to have a better quality of life, now more and more kitchen exhaust pipes are installed. I believe everyone should be familiar with the exhaust pipes. In our life, pipe smoke exhaust is very common. With the increase of using time, the pipe is easy to be blocked or the smoke exhaust is not smooth. Do you know the reason of poor smoke exhaust? How can we solve this problem?
Exhaust hood of Jinan hotel kitchen
The cleaning specifications of the pipeline are as follows: after cleaning the kitchen flue of the smoke hood, the smoke exhaust duct can be seen in most areas, the original tin color of the inner cavity does not leave small oil stains that are difficult to remove; the surface of the kitchen stove is clean and clean; the surface layer of the centrifugal impeller can see the topcoat in most areas; there is no sunken oil stain at the bottom of the motor; there is no oil stain and oil stain that is difficult to remove outside the pipeline.
If we can't clean the smoke exhaust pipe immediately, it may be very inconvenient to clean up after the oil pollution is generated. The oil pollution will endanger the use of the oil fume purification equipment, block the pipeline, make people's kitchen full of kitchen oil fume, and cause us to have a bad feeling about the use of the kitchen. Therefore, people need to clean and maintain the pipes immediately and often to maintain a good natural environment in the kitchen.
It is recommended to clean the exhaust pipe when installing the exhaust pipe. The cleaning of the exhaust hood and kitchen hearth is essential. Before cleaning the pipes, people need to clean the surface layer of the smoke hood, the smoke exhaust system port, the lampshade, the smoke exhaust port, the motor and the kitchen stove in the smoke hood. In addition, it is important to clean the exhaust duct at the connection between the exhaust outlet and the hood and the parallel surface of the hood. The cleaning of this position can not only make the flue pipe give full play to its function after cleaning, but also make the whole kitchen clean and tidy by discharging the flue gas from Jinan kitchen.
In order to clean the smoke hood of the smoke exhaust system software, oil chemicals are used to remove a large amount of oil from the smoke exhaust duct, and then oil chemicals are sprayed from the high-pressure cleaning machine, and then cold water is used for cleaning. Long term use, centrifugal fan blades will produce very thick oil stains, which will also endanger the actual effect of centrifugal fan exhaust system. When cleaning, the centrifugal fan should be removed first to clean the internal centrifugal impeller, inner cavity and surface.
After washing and before assembly, it is suggested to add grease to the centrifugal fan. Kitchen exhaust will make the centrifugal fan more convenient. The actual effect of natural ventilation of Jinan kitchen and smoke exhaust system software will also damage the smoke purification equipment. After long-term use, many oil stains are often found on the inner stage plate and filter screen, and the actual cleaning effect is worse. When cleaning, it is recommended to soak in the cleaner with high efficiency first.
The above is the reason why the installation of smoke exhaust pipe is not smooth. I believe that through the description of this article, you can have a certain understanding and understanding of the causes of poor pipe exhaust. I hope the above can help you. In addition, if you want to know more information, you can pay more attention to the dynamic of our website.