当前位置: 首页 - 新闻资讯 - 公司动态 -

济南通风管道厂家向您分析风管吊架的安装知识

来源:http://www.jntfgd.com 日期:2020-12-21 发布人:gaoshitongferng

在安装通风管道的时候,风管吊架也是安装通风管道中非常重要的一个环节,风管吊架能让通风管道更稳定,而且风管吊架安装方便,优势非常多,下面,随着济南通风管道厂家的脚步,就让我们一起来详细的了解一下风管吊架的安装知识吧,希望能帮到屏幕前的您。
When installing the ventilation duct, the air duct hanger is also a very important link in the installation of the ventilation duct. The air duct hanger can make the ventilation duct more stable, and the installation of the air duct hanger is convenient and has many advantages. Next, with the steps of Jinan ventilation duct manufacturer, let's have a detailed understanding of the installation knowledge of the air duct hanger together, hoping to help the screen You.
济南通风管道
Jinan ventilation duct
济南通风管道厂家带来风管吊架的安装知识:
Installation knowledge of air duct hanger brought by Jinan ventilation pipe manufacturer:

风管吊架安装是通风管道施工中一个很重要的环节,对管道起着支承重量、平衡介质反力、限制位移和防止震动等作用。通风管道制作安装公司为大家介绍下吊架安装的知识:
The installation of air duct hanger is a very important link in the construction of ventilation pipeline, which plays the role of supporting weight, balancing medium reaction force, limiting displacement and preventing vibration. Ventilation pipe production and installation company introduces the following hanger installation knowledge:
1、按风管的线找出吊杆敷设位置,单吊杆在风管的线上,双吊杆可以按托盘的螺孔间距或风管的线对称安装。
1. According to the center line of the air duct, find out the laying position of the suspender. The single suspender is on the center line of the air duct, and the double suspender can be installed symmetrically according to the screw hole spacing of the tray or the center line of the air duct.
2、吊杆根据吊件形式,可以焊在吊件上,也可挂在吊件上,焊接后应涂防锈漆。
2. The suspender can be welded on the hanger or hung on the hanger according to the form of the hanger, and anti rust paint shall be applied after welding.
3、当风管较长时,需要安装一排支架时,可先把两端安好,然后以两端的支架为基准,用拉线法找出中间支架的标高进行安装。
3. When the air duct is long and a row of supports need to be installed, the two ends can be installed first, and then the elevation of the middle support can be found out by using the guy wire method based on the supports at both ends.
4、立管管卡安装时,应先把更上面的一个管件固定好,再用线锤在处吊线,下面的管卡即可按线进行固定。
4. During the installation of riser pipe clamp, the top pipe fitting shall be fixed first, and then the line hammer shall be used to hang the line at the center, and the pipe clamp below can be fixed according to the line.
在管道设,合理布置和正确选择结构合适的支吊架,能改善管道的应力分布,确保管道安全运行并延长管道的使用寿命。所以吊架的安装过程要多加重视,
In the pipeline design, reasonable layout and correct selection of supports and hangers with appropriate structure can improve the stress distribution of the pipeline, ensure the safe operation of the pipeline and prolong the service life of the pipeline. Therefore, more attention should be paid to the installation process of the hanger,
济南通风管道
Jinan ventilation duct
以上就是济南通风管道厂家给大家分享的关于风管吊架的安装知识了,不知道对屏幕前的您有没有帮助呢?
The above is Jinan ventilation duct manufacturers to share with you about the installation of duct hanger knowledge, do not know to the screen you have help?
上一篇:你知道酒店厨房排烟罩的清洁和保养?
下一篇:通风管道清洗前期的检查顺序是怎样的?

推荐产品

  • 厨房排烟
  • 厨房排烟
  • 轴流风机
  • 不锈钢制品

本站图片均由网站所有方提供,部分图片来源于网络,如有任何疑问请及时与我们联系,未经沟通本站不承担相关法律责任!